VDD 500 Virtus Data Display. Even at a distance or in dark environments, the illuminated LED display is easy to read.
The new Virtus Data Display VDD 500 from Eckelmann displays temperature, defrost and alarm status in a visually appealing way. The LED temperature display with white digits is versatile. Among other things it is suitable for front installation in LT/NT refrigeration cabinet panels or for cold rooms. Thanks to the illuminated display, temperature and status can be easily read even in dark surroundings and at a distance, which eases the manual documentation of cold room temperatures, for example.
The Eckelmann UA 400 E, UA 401 E and UA 410 E refrigeration case controllers with 9-pin DIP switch are supported – from firmware version 3.20 or higher. Up to four VDD 500 temperature displays can be connected to each refrigeration controller – simply and cost-effectively via RS485 and at the display interface of the refrigeration controller. Shielded cables (LiYCY 2x2x0.25 mm² or J-Y(ST)Y 2x2x0.8 mm²) are recommended for Modbus cabling (RS485). A separate power supply is not necessary.
The signaling of alarms and defrost is self-explanatory. The three-digit display shows temperatures from -50°C to +100 °C of the allocated temperature sensor – from one of two temperature zones. Configuration and sensor allocation (temperature zones as well as supply and return air) are conveniently managed via the configuration software of the refrigeration controller or the system control center. With its dimensions of W 62 x H 29.5 x D 39 mm, the new compact LED temperature display also finds a perfect place where the well-proven BT 30 from Eckelmann has been used up to now. Refrigerated cabinet manufacturers and refrigeration specialists thus save on constructional adjustments when they switch to the new Virtus LINE generation from Eckelmann in the future. VDD 500 and BT 30 cannot be combined.
